Travertine Polishing is used to remove surface defects or damage to travertine tiles or pavers that have been installed. Travertine is a gorgeous natural stone that is developed near caves or hot springs. At first appearance, some people mistake travertine for marble, a common natural stone used in construction. It is not. Marble is a metamorphic rock that was created by extreme heat and pressure. It is also stronger structurally than travertine. During the production of travertine, carbon dioxide escapes from the stone, leaving pores in the stone, giving it a fibrous appearance. The presence of these pores left behind by carbon dioxide evasion determines the market value of travertine.
Travertine cleaning and repair is very essential therefore proper experts should be hired. The more solid-looking stones with fewer holes cost more than those with numerous holes. Travertine is treated with fillers to mask apparent holes to appear solid and smooth. After filling, the travertine is frequently polished to get the desired filled and polished surface. Other travertine finishes, such as honed, chiseled, and tumbled, are chosen based on their application and the desired texture of the stone. The natural surface is frequently used as a decorative accent on walls, whilst the firm and shiny polished travertine is used for interior floors or counters.
When put as flooring, travertine is a soft natural stone in comparison to granite or marble, and it is readily damaged by impact, harsh contact from wood or metal goods, and general pedestrian traffic. Travertine polishing restores the shine to filled and polished travertine.
Travertine is frequently employed in applications where the stone is not recommended. Even with constant travertine polishing, travertine retains natural stone qualities. People, for example, insist on using travertine on kitchen countertops because it looks wonderful in brochures. When filled and polished, the travertine surface looks stunning, and everyone assumes the stone is “hard.” Consider again.
Acid, which can originate from anything like coffee, juice, alcohol, or even the cleaning chemical you regularly use on the commercial bathroom or kitchen tiles, can readily harm travertine. Acidic cleaners, when used on travertine, will quickly etch or dull the surface. Because travertine table tops are susceptible to chemical damage, you must use coasters and other protective coverings when putting various beverages on them.
Aside from its sensitivity to chemicals, travertine is a delicate stone, even softer than marble. This means that travertine is easily damaged by knives and other equipment. If your dining table is completed with travertine tiles, have tablecloths and padding on hand.
Travertine will readily discolor if the protective coating or sealer on the surface has worn away, necessitating some travertine polishing. Travertine cleaning and repairshould be done regularly. Travertine will be damaged by accumulated filth and sand. Non-slip doormats are ideal for protecting your travertine floors by stopping people from tracking potentially damaging dirt throughout your flooring.
Travertine polishing can be used to recover dulled surfaces. It is preferable if you monitor your travertine and apply a sealant as needed. Fluids can easily seep through exposed stone surfaces and discolor them.
Provided you need to conduct some polishing, you can hire a professional or do it yourself if the surface is not too vast. Begin with a coarse grit, such as a 100-grit buffing pad, and go to a finer grit. To avoid swirls in the stone, try to polish evenly throughout the surface and do not linger on a particular location. Level any sections where the travertine has been restored or where new tiles or pavers have been installed. There is no need to be concerned about discoloration because travertine is evenly colored throughout. After achieving the appropriate sheen, apply the sealer to preserve the new surface from accumulated filth and new stains.